Sony CDP-CE575 - Manuel (Page 20)

20 US
Note
“NO DELAY” does not appear when you operate
from the remote.
To change the current player each time a
whole track is finished, select “X-FADE
ALL.”
To change the current player at the specified
interval, press X-FADE/NO DELAY
repeatedly until the interval you want
appears in the display.
3
Press H to start playing.
The MEGA CONTROL button lights up
while the track in the second player is
selected.
To check the X-Fade mode status
Press X-FADE/NO DELAY once.
The X-Fade mode status appears momentarily.
To cancel No-Delay/X-Fade Play
Press X-FADE/NO DELAY repeatedly until
“X-FADE” or “NO DELAY” goes off. The
current player continues playing.
Tips
• you can change the method (No-Delay or X-Fade)
during play when you press X-FADE/NO DELAY
in Step 2.
• When you press FADER during X-Fade Play, you
can start X-Fade whenever you like.
Even after you have set the X-Fade mode and
started X-Fade Play, you can start X-Fade manually
at the point you like. Note that you cannot do this
operation while the sound from both players is
mixed.
Notes
• The play starts from the second player if you start
play while the MEGA CONTROL button is lit.
• When either player has played all its discs/tracks,
both players stop, even if the other player has not
finished yet.
• Do not use the controls on the second player during
No-Delay Play/X-Fade Play. They may not work
correctly.
Playing Alternately (No-Delay Play/X-
Fade Play) (continued)
Using the CONTROL A1II
control system
This player is compatible with the CONTROL
A1II Control System.
The CONTROL A1II control system was
designed to simplify the operation of audio
systems composed of separate Sony
components. CONTROL A1II connections
provide a path for the transmission of control
signals that enable automatic operation and
control features usually associated with
integrated systems.
Currently, CONTROL A1II connections
between a Sony MD deck, CD player, amplifier
(receiver), and cassette deck provide automatic
function selection and synchronized recording.
In the future the CONTROL A1II connection
will work as a multifunction bus allowing you
to control various functions for each
component.
Note
The CONTROL A1II control system is designed to
maintain upward compatibility as the control system
is upgraded to handle new functions. In this case,
however, older components will not be compatible
with the new functions.
Additional Information