Sony CDP-CE575 - Manuel (Page 19)

Storing Information About CDs (Custom Files)
19 US
Note
If each Disc Name (Disc Memo) of the second CD
player has more than 12 characters, the first 12
characters of each are loaded to this player.
Labeling discs of the second
CD player
You can label discs of the second CD player or
change the Disc Names (Disc Memos) loaded
from the second CD player.
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up.
2
Press CONTINUE.
3
Turn l AMS L to select the disc
you want, then push l AMS L .
4
Press MENU.
5
Turn l AMS L until “DISC NAME”
appears in the display, then push
l AMS L .
6
Input the new Disc Name (Disc Memo)
following the procedure in “Labeling
Discs” on page 16.
Note
The new Disc Names (Disc Memos) are stored on this
player’s memory, so you cannot display them on the
second CD player.
Playing Alternately
(No-Delay Play/X-Fade
Play)
When you connect the second player, you can
play tracks in this player and those in the
second player alternately in any play mode (see
“Connecting Another CD Player” on page 8).
Select one of the following methods:
• No-Delay Play: The current player changes at
each track. Each time the current player changes to
the other player, the other player starts play without
a break in sound immediately after the current
player ends play. The other player skips the lead-in
portion and starts playing from where the sound
actually begins.
• X-Fade Play: The current player changes at each
track or at the specified interval. You can select the
interval among 30, 60 and 90 seconds. Each time
the current player changes to the other player, the
sound from both players is mixed. The current
player ends play by fading out, and the other player
starts play by fading in.
1
Select the play mode you want on each
player.
2
When you select No-Delay Play
Press X-FADE/NO DELAY repeatedly
until “NO DELAY” appears in the display
(or press NO DELAY on the remote).
When you select X-Fade Play
Press X-FADE/NO DELAY or X-FADE on
the remote.
Each time you press X-FADE/NO DELAY,
the indication (X-Fade mode) appears as
follows:
Each time you press X-FADE on the
remote, the indication (X-Fade mode)
appears as follows:
X-FADE 30S NO DELAY X-FADE 60S
X-FADE ALL OFF X-FADE 90S
continued
after 30 sec at track end after 60 sec
X-FADE off after 90 sec