Sony CDP-CE575 - Manuel (Page 18)

18 US
Controlling Another CD
Player (Advanced Mega
Control)
This unit can control a second CD player (see
“Connecting Another CD Player” on pages 8).
Even when a second CD player is connected,
the controls on both of the units will function.
When you press the play button on either unit,
the operating player stops and the resting
player starts.
Note that depending on the player, you may not
be able to operate all the functions of the
second CD player.
The controls as described below are effective
while the MEGA CONTROL button is lit:
CONTINUE, SHUFFLE, PROGRAM,
REPEAT, MENU, MEGA CONTROL,
l
AMS L, H, X, x, m/M
Playing discs of the second
CD player
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up
and the display shows the current disc
number of the second player.
2
Select the play mode you want.
To program tracks, use the controls on the
second player.
3
Press H to start playing.
The play starts and the display shows the
current disc and track numbers and the
playing time of the track.
While the MEGA CONTROL button is lit,
you can control the second player with the
controls on this player as follows:
To
Pause
Stop play
Locate a disc while
the second player is
set to Continuous
Play mode
Locate a track
• To do other operations, use the controls on the
second player or the supplied remote.
• The AMS buttons (./>) and search buttons
(m/M) on the remote operate the second player
as indicated on the remote.
To control the second player directly
using the supplied remote
Set CD 1/2/3 on the remote to CD 3, which is
the same mode set for the second player.
To control this player again
Press MEGA CONTROL. The MEGA
CONTROL button goes off and you can
control this player.
Notes
• You cannot locate a particular point in a track of the
second player using the controls on this player.
• Some controls on this player work on the second
player differently from they do to this player.
Loading the Disc Names
(Disc Memos) of the second
CD player
If the second CD player has the Disc Name
(Disc Memo) function (see page 16), you can
load the Disc Name (Disc Memo) of the second
CD player to this player’s memory and display
them on this player.
1
Press MENU.
2
Turn l AMS L until “LOAD
2ndNAME” appears in the display.
3
Push l AMS L .
This player starts loading. (Loading takes
about one minute.)
Using the Player with Another Component
You need to
Press X.
Press x.
Turn l AMS L until the
display shows the disc number
you want, then push
l AMS L.
Press m/M until the display
shows the track number you
want.