Picture – Sony 3-097-196-14(1) Manuel d'utilisation

Page 96

Advertising
background image

CMT-DH5BT.GB.3-097-196-11(1)



GB

Files cannot be played back.
 USB storage media formatted with file

systems other than FAT16 or FAT32 are

unsupported.*

 If you use partitioned USB storage

media, only files on the first partition

can be played.

 Files that are encrypted or protected by

passwords, etc. cannot be played back.

* This system supports FAT16 and FAT32, but

some USB storage media may not support all

of these FAT. For details, see the operation

manual of each USB storage media or

contact the manufacturer.

Picture

There is no picture.
 Press FUNCTION +/

repeatedly

to select “DVD” (or press DVD 

on the unit).

 Check that the system is connected

securely.

 The video cord is damaged. Replace it

with a new one.

 Make sure you connect the unit to the

video input jack of your TV (page 21).

 Make sure you turn on the TV and

operate the TV correctly.

 Press PROGRESSIVE

on the unit

repeatedly to select “INTERLACE”

if you connect your TV to the unit’s

COMPONENT VIDEO OUT jacks

and your TV cannot accept progressive

signal.

 You have set to progressive format but

your TV cannot accept the signal in

progressive format. In this case, set to

interlace format (the default setting)

(page 22).

 Even if your TV is compatible with

progressive format (525p/625p)

signals, the image may be affected

when you set to progressive format. In

this case, set to interlace format (the

default setting) (page 22).

 Make sure you select the video input

on the TV so that you can view the

pictures from the system.

 Make sure you set the color system

correctly, according to your TV’s color

system.

 Make sure you connect the unit and

your TV using only the supplied video

cord.

Picture noise appears.
 Clean the disc.

 If video signal from your system has to

go through your VCR to your TV, the

copy-protection applied to some DVD

VIDEO programs could affect the

picture quality. If you still experience

problems after checking your

connections, connect your unit directly

to your TV’s S Video input (page 21).

Advertising