Attaching the speaker pads, Power, When carrying this system – Sony 3-097-196-14(1) Manuel d'utilisation

Page 20

Advertising
background image

CMT-DH5BT.GB.3-097-196-11(1)

0

GB

Power

Connect the power cord to a wall socket.

If the supplied adaptor on the plug does

not fit your wall socket, detach it from

the plug (only for models equipped with

an adaptor).

Inserting two R6 (size AA)

batteries into the remote

Slide and remove the battery

compartment lid, and insert the two

supplied R6 (size AA) batteries,  side

first, matching the polarities shown

below.

Note

If you do not use the remote for a long period

of time, remove the batteries to avoid possible

damage from battery leakage and corrosion.

Tip

With normal use, the batteries should last for

about six months. When the remote no longer

operates the system, replace both batteries with

new ones.

Attaching the speaker pads

Attach the supplied speaker pads at each

corner on the bottom of the speakers

to stabilize the speakers and to prevent

them from slipping.

When carrying this system

Perform the following procedure to

protect the DVD mechanism.

Use buttons on the unit for the

operation.

1

Press /

to turn on the

system, then press DVD 

.

2

Make sure that no disc is loaded

in the system and check that “No

Disc” appears.

3

Press /

to turn off the

system and check that “STANDBY”

disappears.

4

Unplug the power cord.

Advertising