Additional information, Troubleshooting, Additional i nf or ma tion – Sony 3-097-196-14(1) Manuel d'utilisation

Page 89: If the standby indicator flashes, General

Advertising
background image

CMT-DH5BT.GB.3-097-196-11(1)



GB

Additional I

nf

or

ma
tion

Additional Information

Troubleshooting

Should you encounter a problem with

your system, do the following:

1

Make sure the power cord and

speaker cords are connected

correctly and firmly.

2

Find your problem in the

troubleshooting checklist below and

take the indicated corrective action.

If the problem persists after doing all

of the above, consult your nearest Sony

dealer.

If the STANDBY indicator flashes

Immediately unplug the power cord,

and check the following items.

 If your system has a voltage

selector, is the voltage selector set

to the correct voltage?

 Are you using only the supplied

speakers?

 Is anything blocking the ventilation

holes on the rear of the system?

After the STANDBY indicator

stops flashing, reconnect the power

cord, and turn on the system. If the

issue persists, contact your nearest

Sony dealer.

General

The clock or timer setting is canceled.
 The power cord is disconnected or a

power failure occurred. Redo “Setting

the clock” (page 24). If you have set

the timer, redo “Waking up to music”

(page 81).

“– –:– –” appears in the display.
 A power failure has occurred. Set the

clock (page 24) and timer settings

(page 81) again.

There is no sound.
 Press VOLUME +

repeatedly.

 The headphones are connected to the

PHONES jack

.

 Check the speaker connections

(page 19).

 The system is in pause mode, in Slow-

motion Play or in Lock Search. Press

(or DVD 

on the unit) to

start the playback.

Continued

Advertising