John Deere AC2-80ES - Manuel (Page 3)

Stationary Electric Air Compressor Manual 3
IMPORTANT!
A "DANGER, WARNING or CAUTION" safety warning will be surrounded by a "SAFETY ALERT BOX".
This box is used to designate and emphasize Safety Warnings that must be followed when operating this
air compressor. Accompanying the safety warnings are "Signal Words" which designate the degree or
level of hazard seriousness. The "Signal Words" used in this manual are as follows:
DANGER: Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided
MAY result in minor or moderate injury or damage to the air
compressor.
The symbols set to the left of this paragraph are "Safety Alert Symbols". These
symbols are used to call attention to items or procedures that could be dangerous
to you or other persons using this equipment.
ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL
INSTRUCTIONS IN THIS MANUAL AND ANY INSTRUCTIONS SUPPLIED BY MANUFACTURERS OF
SUPPORTING EQUIPMENT BEFORE OPERATING THIS AIR COMPRESSOR AND ESPECIALLY POINT
OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE
OPERATOR.
INTRODUCTION
Congratulations on the purchase of your new air compressor! You can be assured your air compressor was
constructed with the highest level of precision and accuracy. Each component has been rigorously tested by
technicians to ensure the quality, endurance and performance of this air compressor.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation and
operation, maintenance and troubleshooting steps described in this manual, you will receive years of troublefree
operation from your new Air Compressor. The contents of this manual are based on the latest product information
available at the time of publication. The manufacturer reserves the right to make changes in price, color, materials
equipment, specifications or models at any time without notice.
Once the unit has been uncrated, immediately write in the serial number of your unit in the space provided
below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim with the transportation
company immediately. Be sure that all damaged parts are replaced an that the mechanical and electrical problems
are corrected prior to operation of the unit. If you require service, contact your customer service.
Mi-T-M ® Corporation, 8650 Enterprise Drive, Peosta, IA 5068
-877-JD-KLEEN / (-877-535-5336) Fax 563-556-35
Monday - Friday 8:00 a.m. - 5:00 p.m. CST
Please have the following information available for all service calls:
. Model Number
. Serial Number
3. Date and Place of Purchase