Harbor Freight Tools 93808 Manuel d'utilisation
For technical questions, please call 1-800-444-3353.
NOTE: When removing the Battery Pack from the saw body, press in on the two locking
tabs located on each side of the Battery Pack and pull straight out from the body.
Warning! If two or more batteries are to be charged, allow the Charging Base time
to cool down between charges.
WORK LIGHT AND LASER GUIDE
Your 18 Volt Cordless Circular Saw has an integrated Work Light and a Laser Guide.
The Work Light (F) is activated and deactivated by depressing the Work Lamp Switch (C)
located on the top of the saw. The Laser Guide (E) is activated by pulling the trigger and
can be activated no other way.
NOTE: The Work Light and Laser Guide are aids and are not intended to function in
any manner other than that described in this manual.