Cleaning instructions, Cle an in g – Napoleon 700 Series 38 Inch Built-In Gas Grill Owner's Manual Manuel d'utilisation

Page 17

Advertising
background image

Napoleon.com

| BUILT-IN Series

Cleaning |

17

Cle

an

in

g

Cleaning Instructions

WARNING!

Always wear protective gloves and safety glasses when cleaning your grill.

WARNING

! Accumulated grease is a fire hazard.

WARNING

! Cleaning should only be done when the grill is cool to avoid the possibility of

burns.

!

First Time Use

1. Wash grids by hand with water and mild dish soap to remove

any residue from the manufacturing process. DO NOT wash in a

dishwasher.

2. Rinse thoroughly with hot water and dry completely with a soft cloth

to prevent moisture from entering the cast iron.

Cast Iron Grids

• Season your grids to add a protective coating to prevent corrosion

See Grilling Tips –

How to Season your Cast Iron Cooking Grids

.

Stainless Steel Grids

• Stainless steel cooking grids can be cleaned by preheating the grill

and using a wire brush to remove residue.

• Stainless steel grids will permanently discolor from regular use

because of high temperatures when grilling.

Infrared Side Burner

• Most drippings and food particles that fall on the infrared burner

surface incinerates immediately because of the high intensity heat.

• Do not clean the ceramic tile with a wire brush.
• Do not use water or other liquids to clean the burner. An immediate

change in temperature will cause cracking of the ceramic tile.

• Light burner and operate on high for 5-10 minutes to remove any

left-over residue.

Inside of the Grill

1. Remove the cooking grids.
2. Use a brass wire brush to clean loose debris from the sides and

underneath the lid.

3. Scrape the sear plates with a putty knife or scraper. Use a wire

brush to remove the ash.

4. Remove the sear plates and brush debris from the burners with a

wire brush.

5. Sweep debris from inside the grill into the drip pan.

Advertising