Medal Sports 38407 - Manuel (Page 6)

FIG.3
6 . Carefully align the seams of the Plastic Legs - A (#5) and Plastic Legs - B (#6), lock them using locking pieces on
the legs. Note: Listen to the sound of “click” when locking the legs together to ensure the legs are locked
firmly.
7. Next, lock the Plastic Legs - C (#7) and Plastic Legs - D (#8) together in the same way. See FIG.3.
FIG.4
8. Attach the Plastic Legs (#5 & #6) to the Inside Legs (#2 & #3) and then place another Plastic Legs (#7 & #8)
around the other side. See FIG.4.
9. Align the holes of the Plastic Legs (#5 & #6, #7 & #8), then attach them together using four Screws (#22) per Leg.
Note: it is not recommended to use a power screwdriver when assembling the Plastic Legs. Over - tight-
ening of the screw can cause damage to the leg.
5
FIG. 3
FIG. 4
5
8 7
6
Locking piece Locking piece
22
7 8 and
2 3 and
5 6 and