Denon DRA-395 - Manuel (Page 17)

17
ENGLISH
Multi-Source recording/playback
The Multi-Source function allows you to record a source other than the source currently playing or to output its signal to the MULTI ZONE output
terminal.
[1] Playing one source while recording another (REC OUT mode)
B
1, 4 2
1 Press the REC OUT button.
• lights and the unit is set to
the REC OUT mode.
REC
REC OUT
2 Press the SELECT button until the
source you want to record appears
on the set's display.
• The indicator for the selected
program source lights.
3 Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
SELECT
2 1
4 To cancel, press the REC OUT
button again.
• is extinguished and the REC OUT mode of this unit is
cancelled.
REC
NOTES:
• The signals of the source selected in the REC OUT mode are also
output from the ZONE 2 and ZONE 3 output terminals. (There
is output when ZONE 2 and ZONE 3 are ON.)
• When the REC OUT mode is set and both the ZONE 2 and
ZONE 3 modes are set to “ON”, the modes do not turn off
even when the REC OUT button is pressed.
To turn them off, set the ZONE 2 and ZONE 3 modes to
“OFF”.
(Main unit)
(Main unit)
REC OUT
(Main unit)
DISPLAY