Important safety instructions, Installation requirements, Read and save these instructions – Maytag UXT5536AAS Manuel d'utilisation
Page 3: Tools and parts
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions provided
with any tools listed here.
Tools needed
■
Drill
■
1
1
/
4
" (3 cm) drill bit
■
1
/
8
" (3 mm) drill bit for pilot holes
■
Pencil
■
Wire stripper or utility knife
■
Tape measure or ruler
■
Caulking gun and weatherproof caulking compound
■
Flat-blade screwdriver
■
Phillips screwdriver
For vented installations, you also need:
■
Saber or keyhole saw
■
Vent clamps
■
Metal snips
■
Compass or 8" (20.3 cm) circle template
Parts supplied
Remove parts from package. Check that all parts are included.
■
2 - Metal filters
■
6 - 4.5 x 13 mm mounting screws
■
3 - 4 x 8 mm damper screws
■
3
1
/
4
" x 10" (8.3 x 25.4 cm) damper/vent connector
■
4 - 5 x 45 mm screws
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS