Maytag MHW4300DC - Manuel (Page 11)

11
8.
Select CYCLE*
The display will show the default settings for the selected cycle.
To adjust a setting, touch its name – Temperature, Soil Level, or
Spin Speed. Adjusting settings will change the Estimated Cycle
Time. Tightly packing the load, unbalanced loads, or excessive
suds may also cause the washer to increase the cycle time.
Turn cycle knob to select your wash cycle. See “Cycle Guide” for
details on cycle features.
9.
Adjust settings, if desired*
10.
Select any additional options*
To add an option to the cycle, touch its name – Fresh Hold/Fresh
Spin, Steam for Stains, Extra Rinse, Cycle Signal, or Control Lock.
To remove an option from the selected cycle, touch the option
again.
Appearance may vary.
Appearance may vary.
Appearance may vary.
* Not all options and settings are available with all cycles.
See “Cycle Guide” for available options and settings.
11.
Setting a delayed start
If you do not want to begin a cycle immediately, you may choose
the DELAY START option. This will delay the start of the wash
cycle by 9 to 12 hours.
To set a delayed start:
1. Touch DELAY START + and – buttons to set the desired delay
time.
2. Touch and hold START to set the delay. The delay countdown
has started when the START light stops blinking.