Weston 10" Meat Slicer - Manuel (Page 5)

-5-
GROUNDING
This appliance must be grounded while in use to
protect the operator from electrical shock. The
appliance is equipped with a 3-conductor cord
and a 3-prong grounding type plug to fit the proper
grounding-type receptacle. The appliance has a
plug that looks like Figure A. An adaptor, Figure B,
should be used for connecting Figure A plugs to two-
prong receptacles. The grounding tab which extends
from the adaptor must be connected to a permanent
ground such as a properly grounded outlet box as
shown in Figure C using a metal screw.
DO NOT USE WITH AN
EXTENSION CORD!
Figure A
Figure B
Figure C
Circuit
Grounding
Conductor
Grounding
Prong
Metal
Grounding
Screw
Cover of
Grounded
Outlet
Box
Grounding
Means
AA2220
GROUNDING INSTRUCTIONS
HANDLE CAREFULLY!
KEEP FINGERS AWAY FROM THE BLADE!
NEVER FEED FOOD BY HAND.
ALWAYS USE THE FOOD PUSHER!
Always use completely assembled Meat Slicer
with Food Carriage and Food Pusher.
Protective/cut-resistant Kevlar gloves are recommended
whenever handling the Blade!
WARNING!
SHARP BLADE
WARNING!
Before cleaning, assembling or disassembling the
appliance, make sure the appliance is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
Before using your Meat Slicer for the
first time, wash all parts contacting food
thoroughly, taking particular care to remove
all grease and oil from surfaces. Dry all
parts thoroughly before reassembling. See
“Cleaning Instructions” section of this booklet.
CAUTION! Sharp Blade!
PRIOR TO USE
Figure 1 CAUTION!
SHARP
BLADE!