Danby DAC15009EE - Manuel (Page 8)

FEATURES (cont’d)
ADJUSTING
AIR FLOW
The 4-way air directional louvers allow you to direct the air flow Up or Down and Left or Right throughout the
room as needed.
Recommendation: When cooling, adjust blades to face upward. If you orient the air flow blades downward
and the unit operates in cool mode for long periods of time, dew may form and drip from the surface of the
blades
INSTALLATION
Electric Shock Hazard: To avoid the possibility of
personal injury, disconnect power to the unit before
installing or surfacing.
TOOLS REQUIRED
Fig. 1
• Large flat blade screwdriver • Pencil
• Socket wrenches • Level
• Adjustable wrench or pliers • Tape measure
• Phillips screwdriver
Fig. 1 INSTALLATION HARDWARE
7/16” locking
screw & flat
washer for
window panels
2 each
3/4” long
Hex-head
screw
4
Safety Lock
1
1/2” long
screw and
locknut
4 each
3/4” long flat
head bolt and
locknut
2 each
Sill Angle
Bracket
2
5/6” long
Hex-head
locking screw
for top angle,
side retainer.
10
BEFORE INSTALLING
• Check window opening size against dimensions of your
unit ( see Unit Specifications pg. 2).
• Check condition of window; all wood parts of window
must be in good shape and able to firmly hold the needed
screws. If not, make repairs before installing unit.
• Check for anything that could block airflow; check area
outside window for things such as shrubs, trees, or
awnings. Inside, be sure furniture, drapes or blinds will not
stop proper airflow. (See Fig. 2 pg. 7)
• Carefully unpack air conditioner. Remove all packing
material, and check for all included installation hardware.
7
Left or Right
Up or Down