Maytag W10176966C - Manuel (Page 18)

Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The
preset settings provide the recommended fabric care for the selected cycle. See chart.
Cycles Soil Level
(cycle time) Water Temp Spin Speed
Whitest Whites Normal
(1:15) Hot/Cold Extra High
Heavy Duty Heavy
(1:20)
Hot/Cold Extra High
Normal/Casual Normal
(0:50) Warm/Cold Extra High
Delicate Normal
(0:40) Warm/Cold Medium
Quick Wash Light
(0:30)
Warm/Cold Extra High
Handwash Normal
(0:30) Cold/Cold Low
Clean Washer
with
AFFRESH™ N/A
(1:05)
Sanitize N/A
Rinse & Spin N/A
(0:22) Cold/Cold Extra High
Drain & Spin N/A
(0:13) N/A Extra High
Soak Normal
(0:30) Warm/Cold No Spin
To change the preset cycle settings
Press the selector of each setting until the desired setting illuminates.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not accustomed to. You may hear
various sounds when the door is locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will be momentary pauses. You
will hear water spraying and splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
Options
You can customize your wash by adding options to your cycle selections. You can add or
change an option after starting a cycle anytime before the selected option begins. Not all
options are available with all cycles.
power * cancel normal,
casual
heavy
duty^ '
whitest
whites
signal on • off
start ® pause
delicate
quick wash
handwash
soak
drain a spin
rinse a spin
clean washer
wi»affresli
door locked
press pause to unlock
options
■ See the "Laundry Guide" for an overview of possible options for each Wash Cycle
selection.
■ You can select more than one option for a cycle. Some options cannot be added to some
cycles; for example, Steam Clean cannot be added to the Quick Wash cycle.
■ If an option is available with a selected cycle, the light for that option will illuminate
when selected.
■ If an option is unavailable with a selected cycle, there will be a short tone, and the light
for that option will not illuminate when selected.
Signal On/Off
Use this option to turn the buzzer indicating the end of the cycle on or off.
Max Extract™
Use this option to add an additional spin to any cycle to improve drying times for some heavy
fabrics by reducing excess water, which may save energy.
18