Philips 10000104 Manuel d'utilisation
Page 29
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
To perform the descaling before the machine blocks or notifies the need to perform it.
Insert the descaler and press
the key to begin.
The machine begins to
dispense the descaling solution
through the hot water spout.
The dispensing occurs at
preestablished intervals, in
order to allow the solution to be
more effective.
When the solution is finished
the following message appears
on the display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refill with fresh
drinking water.
Insert the tank with fresh
drinking water.
Rinse the machine circuits by
pressing the^p> key.
The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water
tank to be filled.
Press the^^ key and exit the
programming by pressing the
MENU key. Check the quantity of
water in the tank and install the
“Aqua prima” filter, if desired.