Milk wash cycle, 2^ programming the machine – Philips 10000104 Manuel d'utilisation
Page 26
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
2^ PROGRAMMING THE MACHINE
Milk wash cycle
MENU > machi
To rinse the machine’s internai circuits used tor preparing miik.
This cycie is proposed atter 14days trom the tirst dispensing ot a beverage with miik; the “miik circuit
washing” message starts tiashing (see page 13); pertorm the washing cycie as indicated in this section. This
cycie must be necessariiy pertormed after 21 days; in this case, the “miik circuit washing” message remains
on and the^^ key must be pressed. Refer to the instructions at point (4). The machine switches to the
status described at point (5).
Note: before performing this function make sure that:
1. a iarge enough container is at hand;
2. the miik container has been adequafeiy cieaned of aii miik residue;
3. the wafer tank contains a sufficient quantify of wafer.
THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION.
USE ONLYAND EXCLUSIVELYTHE PROVIDED DETERGENT.
Position the miik container
under the wafer spout.
insert the detergent fabief in
the container.
Press the^V key to dispense
hot wafer in the container.
Waif^
Open the compartment and
insert the container with the
detergent.
I
#/^o
When the container is fiiied
the foiiowing appears^
Ciose the compartment.
Press to start.