Adjustments 9, Coffee intensitiy, Adjusting the height of the drip tray – Philips 10000104 Manuel d'utilisation
Page 11: Filling the milk container, Adjustments, Coeeee intensitiy, Adjusting the height oe the drip tray, Pilling the milk container, Sbs - saeco brewing system
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
ADJUSTMENTS 9
COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the Intense taste you desire. Simply
turn the dial and you will notice that the coffee goes from mild Intensify to strong Intensify.
SBS - SAECO BREWING SYSTEM
SBS adjusts the Intensify of the brewed coffee,
and can even be adjusted while brewing. Any
adjustment has an Immediate effect on the
brewing coffee.
MEDIUM
COFFEE
MILD
COFFEE
STRONG
COFFEE
ADJUSTING THE HEIGHT OF THE DRIP TRAY
Adjust the drip fray before dispensing any products.
Height-adjustable drip fray.
To raise the drip fray, press lightly on the lower part of the button. To lower the fray,
press lightly on the upper part of the button; when the desired height Is reached,
release the button.
Note: there Is a red floater In the drip fray. When If rises, the fray must be emptied
and washed.
FILLING THE MILK CONTAINER
Only the container with the cappucclnafore must be filled before preparing beverages with milk. Do not
use milk after the best-before date. (Important! Refer to the Instructions for maintenance and cleaning
of the cappucclnafore on page 36).
Open the milk compartment and
remove the container located
within.
Q
We recommend using the other
supplied container to store any
remaining milk In the refrigerator.
Clean the circuits using only the
container with the cappucclnafore.
Remove the container cover and pour In the milk.
Close the container and put If back In Its
appropriate place. Make sure to carefully close the
compartment.