Levana LV-TW502 - Manuel (Page 16)

16
PAIRING THE DEVICES
The camera and monitor come paired (connected) together. If you do receive this
package and the devices do not automatically connect and transmit, you may do so
manually.
1. Slide the power switch
on the right hand
side of the camera to the OFF position.
2. Cover the light sensor on the front of the camera
with your finger or a cloth.
3. Slide the power switch on the camera to
the ON position.
4. With the monitor switched on, press and hold
the play/pause button for two seconds.
5. The pair icon will appear on the screen
and the power LED on the camera will blink for
a few seconds.
6. Press the menu button on the monitor to
confirm the setting.
7. C1... OK! will appear when the camera and
monitor are paired successfully and then
the video and audio will be transmitted
automatically.
Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources of power
from the camera and monitor and start the pairing process over again.
Light Sensor