Levana LV-TW502 - Manuel (Page 15)

15
Adjusting the VOX* Sensitivity
VOX = Voice Operated Transmission = Sound Detection
The VOX function allows the camera to transmit video and audio immediately after a sound is heard. Once
transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a button on the
monitor will also turn the screen and transmission ON at any time.
Setting the sensitivity of the VOX function will affect how easily the video will be transmitted, one bar
will require much louder sounds being detected before transmission will begin, than the five bar setting
requires.
1. Press the menu button
four times.
2. The VOX icon will display on the screen along with the current status of the function, either
OFF or a gauge indicating the current sensitivity, 1-5.
3. Use the up and down buttons to turn the VOX function OFF or adjust the sensitivity up and
down. One bar being the lowest sensitivity and five bars being the highest sensitivity.
Intercom Feature
This video baby monitor is equipped with a 2-way audio intercom to enable you to talk to and soothe your
baby back to sleep without going into the room.
1. Press and hold the TALK button on the front of the
monitor.
2. The intercom icon will appear on the monitor screen,
and you will be able to speak and be heard through
the speaker in the camera.
3. To stop talking release the TALK button.
Range
• When the distance between the camera and monitor is too great, the screen will go black and the
range icon will appear
, if this happens you will have to move the units closer together.
Adjusting the volume
1. In normal monitor operation, you can press the
up and down buttons on the monitor to
adjust the volume of the noises you are hearing
from baby’s room.
MONITOR OPERATION