Levana LV-TW502 - Manuel (Page 13)

13
CAMERA OPERATION
Switching the Monitor ON/OFF
1. Press and hold the power button until
you hear two beeps.
2. The LEVANA logo will appear on the screen
for a moment followed by the picture being
transmitted.
3. To turn off the unit, press and hold the power
button again for 1 second.
Note: The power LED FLASHES RED when the rechargeable battery has low power.
Note: If you are using batteries to power the camera unit, and it does not start up
when the power switch is in the ON position, you may need to replace the
batteries. The Power LED will flash slowly when the batteries are low power.
Night Vision
The camera is equipped with four IR (infrared) LEDs. These LEDs, located on the front of the camera, allow
you to see up to ten feet in complete darkness. Allowing you to check your baby at any time of night.The
night vision LEDs will activate automatically when the camera detects that the light levels are too low.
MONITOR OPERATION
Without Night Vision With Night Vision