Philips DVD835AT - Manuel (Page 74)

- 3
RETURN
RETURN ; If you press the RETURN button while a menu appears on the screen, you will return to
I 1 the previous menu screen.
When you select “Analog 6Ch’
Make the follow settings for the built-in 5.1 ch surround decoder.
1) Select an item by pressing the a / t buttons, and press the ENTER button.
2) Make the settings (see below) by pressing the a / t / ◄ / ► buttons, and press the
ENTER button.
1 Large 1
C(Center) Speaker EH
S(Surround) Speaker EH
Subwoofer EH
Center Channel Delay
Surround Channel Delay №553
Test Tone
C.S.Speaker Large: When the center speakers and surround speakers can reproduce low frequency
Size
signals below 120 Hz.
Small; When the center speakers or surround speakers cannot reproduce low frequency
signals below 120 Hz.
C(Center)
Speaker On
Off
S(Surround)
Speaker On
Off
Subwoofer On
Off
When you connect center speakers.
When center speakers are not connected.
When you connect surround speakers.
When surround speakers are not connected.
When you connect a sub woofer.
When a sub woofer is not connected.
• Adjusting the deiay time:
When enjoying 5.1ch surround playback, it is ideal to choose a listening position that is the same distance
from each speaker. By adjusting the delay time of the center/surround speakers, you can virtually create an
ideal listening environment (as if the center/surround speakers were at their ideal locations respectively as
below.)
Center Channel 0msec: When Df equals Dc.
Delay 1 msec: When (A) is approx. 34 cm (13 inch)
2msec: When (A) is approx.
68 cm (27 inch)
3msec: When (A) is approx. 102 cm (40 inch)...
*(A) =Df-Dc
Get your optimum value (0, 1, 2 ... 5)
dividing (A) by 34.
Surround 0msec: When Df equals Ds.
Channel Delay 1 msec: When (B) is approx. 34 cm (13 inch)
2msec: When (B) is approx. 68 cm (27 inch)
3msec; When (B) is approx. 102 cm (40 inch)...
*(B) = Df-Ds
Get your optimum value (0, 1,2 ... 15)
dividing
(B) by 34.
All speakers should be located within a
circle with a radius of Df.
a / t
3) Select “Test Tone” and press the ENTER button.
The DVD video player outputs a test signal to each speaker when it is in stop
mode. When playing a DVD video disc, it substitutes the current sound for the
test signal.
Press the ◄ / ► buttons to switch the receiving speakers, and adjust the volume
of each speaker at the same level by pressing the
a / T buttons.
If all the volume levels cannot be equalized, adjust them on the amplifier.
(Continued)
39