Clock basics, Initial time, Note – Panasonic CQDF100U Manuel d'utilisation
Page 14: Time reset, Clock display, O clock basics, B /5, Cq-df100u
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Clock Basics
The 12-hour system is used for the clock.
j J L J L J J i *
Initial Time
©Press [DISPKCLOCK).
“ADJUST” appears on the display.
(
2
) Press and hold [DISP]{CLOCK) again
for more than 2 seconds. “12” blinks,
and the time setting mode is activated.
© Press
[ V
TUNE]
or
[
a
TUNE]
to set
the hour.
©Press [DISP](CLOCK) again to pro
ceed with the minutes setting.
® Press [V
TUNE]
or [
a
TUNE]
to set
the minute.
Press
[ V
TUNE]
or
[
a
TUNE]
for
more than 0.5 seconds to change
numbers on the display in sequence.
©Once the time has been set, press
[DISP](CLOCK).
Note:
The [DISP]{CLOCK) button will not work while the CD player or
CD changer is set to the scan play mode. Cancel the scan play
mode before pressing [DISP](CLOCK).
B /5
1 4
Time Reset
Press and hold [DISP]{CLOCK) for more than 2 seconds to acti
vate the time setting mode to reset the time. Then, repeat steps @
to © above.
Clock Display
Press [DISP](CLOCK) to change to the clock display as follows.
In Tuner Mode Broadcast station<—> Clock
In CD Mode Playing time <—> Clock
When the power is turned off while the time is displayed, the
clock mode remains on. When [DISP] is pressed, the system
is turned off completely.
Note:
The power must be switched off before leaving the
car if it does not have an accessory.
CQ-DF100U