Panasonic KC-TCC942-B - Manuel (Page 72)

Before Requesting Help
Answering system
Problem Remedy
The answering system is on,
but no incoming messages are
recorded.
• The recording time is set to “greeting
only". Select “1 minute” or “unlimited"
(P- 23).
• Memory is full. Erase some or all of
the messages (p. 53).
“ nun ” is displayed and the
ANSWER ON button light
flashes rapidly, and no new
messages are recorded.
• Memory is full. Erase some or all of
the messages (p. 53). If “F5BTI” is still
displayed and the ANSWER ON
button light flashes rapidly, erase your
greeting message and re-record a
shorter greeting (p. 20, 21).
Some incoming messages
have not been recorded
completely.
• Set the CPC function to “b” (p. 27).
You cannot operate the
answering system at the base
unit.
• The handset user is operating the
answering system. Wait until the IN
USE/CHARGE indicator light goes
out.
You cannot operate the
answering system from a touch
tone phone.
• Be sure to press the correct remote
code.
• The answering system may not
respond if the phone produces tones
which are too short to activate the
unit. Press each button firmly.
• The answering system is off. Turn it
on (p. 61).
You cannot operate the
answering system with the
handset. • Someone is operating the answering
system.
• You are too far from the base unit.
Move closer to the base unit.
• The unit is receiving a call. To answer
the call, press (TALK).
72