Panasonic KC-TCC942-B - Manuel (Page 18)

Settings
Storing the Area Code
You have to program your area code first before using the Caller ID feature
(p. 38). Then incoming calls from the same area will be recorded in the
Caller List without the code. You do not have to remove the area code
before storing or calling back. Also, when incoming calls from a different
area code are received, “1” will be added before the area code
automatically.
The TALK/BATT LOW indicator light must be off before programming.
1
2
Press iPROGRAMl.
• The TALK/BATT LOW indicator flashes.
Press ISEARCHl V (NEXT key).
Press ISEARCHl A (YES key).
• The current setting is displayed.
The factory preset is “—”.
Enter your area code.
• If you enter a wrong number, press
ICLEARl. then enter the correct number.
When finished, press [PROGRAMI.
• The stored number is displayed.
• In a few seconds, the handset will return
to the stand-by mode.
SAVE AUTO# ?
V=NEXT a =YES
SAVE AREA CODE?
v^NEXT a =YES
AREA CODE = ---
ENTER AREA CODE
AREA CODE = 123
PROGRAM=SAVE
AREA CODE = 1 2 3
To cancel, press lEXITl. then start from step 1.
To erase the area code
1. Press (PROGRAM!.
2. Press (SEARCH] V (NEXT key).
3. Press (SEARCH] A (YES key).
4. Press (CLEARI.
5. Press ( program ].
18