Setting the greeting monitor function, Setting the cpc (calling party control) function – Panasonic KC-TCC942-B Manuel d'utilisation
Page 27
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
The CPC function is preset to “A”. If you use a call waiting service, set to
“b”, or the call waiting tone will disconnect someone leaving a message.
Setting the CPC (Calling Party Control) Function
1. Press IPROGRAMI.
2. Press [SCREEN/PLAYBACKl.
3. Press (D-
• The current setting “A” or “b” is displayed on the base unit.
4. To select “b”, press ©.
OR
To select “A”, press (T).
• The setting is displayed.
5. When finished, press iPROGRAMl.
Setting the Greeting Monitor Function
When your greeting message is being played to the caller, you can also
listen to it through the speaker. To listen to your greeting, set to “2 (ON)”.
The factory preset is “1 (OFF)”.
1. Press (PROGHM)-
2. Press [SCREEN/PLAYBACKl.
3. Press
{4}.
• The current setting “1” or “2” is displayed on the base unit.
4. To set to “2 (ON)”, press
OR
To set to “1 (OFF)", press (T}.
• The setting is displayed.
5. When finished, press I PROGRAM].
27