Panasonic HIGH SPEED KV-S6045W - Manuel (Page 47)

Troubleshooting
LCD Possible Cause Remedy
w
The rollers are dirty.
Clean the rollers.
(See pages 30 through 33.)
W
The rollers need to be replaced.
Replace the paper feed roller
module, separation roller
module and retard roller
module.
(See pages 38 through 43.)
W
Double feed may have
occurred.
Check the scanned data.
M
X X
The document is jammed.
Open the front door and
remove the jammed paper.
(See pages 28 and 29.)
2 J A M
X X
The document is jammed.
Open the front door and
remove the jammed paper.
(See pages 28 and 29.)
A document remains in the
scanner.
Open the front door and
remove all of the remaining
documents.
Dust adheres to the document
sensors.
Clean a dust using the included
blower.
(See pages 34 and 35.)
X [ X
Multiple sheets were fed into
the unit.
Open the front door and
remove the jammed paper.
(See pages 28 and 29.)
U 3 0 F r o n t D o o r
x x x x x x x x
The front door is open. Close the front door.
The ADF door is open. Close the ADF door.
x X
The imprinter (top) door is
open.
Close the imprinter door.
V e
x [ X
The document cover is open. Close the document cover.
F X X
TT
X X A user non-servicable error has
occurred.
Please consult with a service
representative.
I /
l2i
An interface board has not
been installed.
Install the optional interface
board.
47