Panasonic HIGH SPEED KV-S6045W - Manuel (Page 43)

Replacing Consumable Roller Modules
14 Close the conveyor by pushing it
into the unit.
• When the conveyor is closed, the click-
stop mechanism will operate.
• If the conveyor is not closed correctly
and the operation in step 15 is done,
the conveyor may break.
15 Close the ADF door.
• Push both sides of the ADF door
down gently until it clicks into place.
If the ADF door proves difficult to
close, push its left side down with a
little more force.
• After replacing roller modules, clear
the "Replace Roll. Warning* display.
(Refer to page 18.)
43