Panasonic HIGH SPEED KV-S6045W Manuel d'utilisation
Page 42
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Replacing Consumable Roller Modules
11
Pull the right side of the shaft in
the direction of arrow ©, and hold
it there.
Pull the retard roller module in the
direction
of
arrow
and
then
remove it.
12
Take out the retard roller module
in the optional "Roller Exchange
Kit (KV-SS044)".
For supplies and accessories:
Call 1-800-346-4768. (U. S. A. only)
13
Pull the right side of the shaft in
the direction of arrow ® and hold
it there.
Attach
the
new
retard
roller
module as shown in the direction
of arrow d).
Return the right side of the shaft
as shown in the direction of arrow
• Confirm if pin A and pin B are
inserted in their notches correctly,
• Attach the retard roller module so
that the notch A is on the left side.
Retard roller module
When the pin is not inserted in the notch
properly, it may cause double feeding or a paper
jam.
42