Counter setting menu (by pressing the counter key), Display panel instructions – Panasonic HIGH SPEED KV-S6045W Manuel d'utilisation
Page 16
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Display Panel Instructions
15 Save "Scanning Settings'
(Execution)
1 5
S a
V
e
S e t
t
i 1 n
9
E x e c 1 =
< >
16 Load scanning setting
1 6
L o a d
S e t
t
i n 9
D e f a u 1 t
When pressing the ► key and the
M
key simultaneously,
the scanning conditions set in 01 to 14 above will be saved
in the memory selected in the "Save Scanning Settings
(Select memory)".
"Completed" will be displayed after saving.
C
Default-«^ Memory 1 Memory 2
n
If you use the ►key or the
M
key to select Memory 1 or
Memory 2, the saved scanning items will become valid by
the "Save Scanning Settings (Execution)".
If other scanning items have been saved in another
memory, during scanning you can change the scanning
items easily.
This setting will not be changed even if the power is
turned off and on, and will remain valid.
If "Default" is selected, all of the saved scanning settings
will return to the default values. (See "01" to "14" of the
left side display.)
Scanning settings 01*14 must be saved using setting "15 Save Scanning Settings (Execution)".
Even if they are not saved, they will be applied. If the power is turned off, the next time the unit is used
they will not be applied.
Counter setting menu (by pressing the COUNTER key)
Number, mode and default display
• Pressing the
A
key will change to the
next mode,
# Pressing the ▼ key will change to the
previous mode.
Contents
• Pressing the ► key or the key will change to another
value.
01 Select the counter displayed
on the LCD
p Scan User
-*—1
Scan : After scanning one time, the scanner counter will be
cleared.
User: This counter is set to the default value.
The user counter extender is also set by the user,
They will be cleared when the power is turned
OFF.
0 1
D i
s
P
C 0
u n t
e r
1
S
c a i n
02 Setting the user counter
Pressing the ► key once will increase the user counter by
one. Pressing the ◄( key once will decrease the user counter
by one.
Pressing the ► key or the
M
key continuously will change
the user counter value by increments of 10.
0
2
U s
e
r
C
o
u
n t
e
r
0
02 Setting the "User Counter Extender"
p +1 + 2'«-^ + 3‘*-^............... +8'^ +9 ■*—1
0
2
U s e r
C 0 u
n t
e
r
Pressing the ► key once will increase the user counter
extender by one. Pressing the key once will decrease the
user counter extender by one.
+
1
02 Clear the "User Counter"
When pressing the ► key and the key simultaneously,
the user counter will be cleared.
Then "Completed" will be displayed.
0
2
U s
e
r
C 0 u
n t
e
r
C
1
e
a r = < >
16