Installation procedures, Secure the mounting collar 0, Secure the rear of the unit – Panasonic DF66EUC Manuel d'utilisation
Page 26: Using the rear support strap, Using the rubber cushion (optional), Installation guide, Continued) □ installation procedures
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Installation Guide
(continued)
□ Installation Procedures
1. Secure the Mounting Collar 0.
Insert Mounting Collar 0 into the car’s dashboard, and bend mounting tabs out with a screwdriver.
Mounting Tab
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt (
5
), using a suitable wrench.
c) Insert the unit into Mounting Collar 0 and push it in until “click” is heard.
Lock Lever
Make sure that the lock
lever is flush with the
mounting collar {not
projecting outward).
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap
@
Affix one end of the Rear Support Strap 0 to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt 0 on the rear of the unit with Rubber Cushion (Optional), and mount it into the
existing Rear Support Bracket.
Fire Wall of Car_______ Rear Support Bracket
0 Tapping Screw
/ 3 m m 0
(existing on the car)
26
CQ-DFX77/DFX55/DF66/DF44EUC