Panasonic PanaSync - Manuel (Page 14)

On-Screen Display
OSD menu
H:70.2kHz V:165.5[¥
<> a 0
ESC^
■HPOSITION ^
SOi^O^I^ I MB*—13
The adjusfmenfs needed to adjust the display unit
are shown on the screen.
blnput frequency display
This display the
signal frequency
input synchronization
Q Select key
When the ffl or H key is pressed, icon can
be selected.
Selection mark
(example: horizontal position adjustment)
§ Adjustment menu icons.
Btit
Press the 9 or B keys to exit, and the
OSD is disappears.
Name of adjustment screen
Menu icon
The adjustment level is shown by both a
number and a bar. It can be varied with
the front a or B keys.
Operation Procedure
hbrizontal position adjustment
1. Press the S key to display the menu.
SELECT ADJUST
^ ►
Referring to the figuree b'eiow, adjustment using
the on-screen display.
CD
2. Press the S key, to move the selection mark
to the iE](language) icon; then press the 9 or
B key to select (S).
SELECT ADJUST „
^ ► CD
HE
3-
3. Select one of English, French, Italian, Spanish,
German and Japanese as the display language.
When the
9 or B key is pressed, the display
language changes.
SELECT ADJUST _
^ ► CD
3-
4. Select the item to be adjusted (example hori­
zontal position) from the menu screen.
SELECT ADJUST _
^ ► CD
^1--- rr
5. Press the front 9 or B keys to reach the
desired condition.
SELECT
■4 ^
ADJUST
◄ ►
h
:
6. Press the ESC to memories the settings and
complete the adjustments.
If there are no operations performed for about
10 seconds, the OSD screen disappears.
— 9 —
H:70.2kHz V:165.5Hz
[3 B 0 m
n Cr Q C7 №
ESC SI
CONTRAST
50301 ]©B
n a Q a
?<i
n ES
LANGUAGE [EN^
ITA ESP DEU 0
a 3 H B
O n a a
H.POSITION
50BtSfB~ ]S®