Display stand removal/replacemenp), Removing the monitor stand, Display stand removal/replacement – Panasonic PanaSync Manuel d'utilisation
Page 13
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
( Display Stand Removal/ReplacemenP)
Observe the following instructions if the unit is to be used with the display
stand removed.Repeat this procedure in the reverse order if the display stand
is to be re-attached.
1.Removing the monitor stand
I
Lay the screen down onto a soft object (cushion,etc.) to
avoid scratching.
I
Grasp the bottom of the display stand as indicated in the illustia-
I
Apply pressure with your fingers to №e area shown in the illustration
and lift the stand slightly in an upward direction .This will release the
I
Once the lock has been released,remove your fingers and
firmly lift upwards at an angle.
I
This will separate the stand from the main unit.
2. Installation
Place the unit on top of the computer to
be used or on a tabletop.
Store the display stand in the box or other
receptacle in which the computer was
purchased.
—
8
—