Thetford N84 Series Installation Manual - Current - Manuel (Page 5)

Installation Manual 5
Key Refrigerator Dimensions
These key refrigerator dimensions are for your
reference as necessary (See Art01733).
Refrigerator cabinet width w/o trim - 23.47 in. max. ...1
Refrigerator width overall w/ trim - 24.6 in. .................2
Refrigerator cabinet to side trim - 0.80 in. ..................3
Refrigerator cabinet height w/o trim............................4
N600 models - 52.85 in. max.
N800 models - 59.85 in. max.
Refrigerator height overall w/ trim...............................5
N600 models - 54.5 in.
N800 models - 61.5 in.
Refrigerator cabinet to top/bottom trim - 0.93 in. ........6
Enclosure wall to hinges - 1.10 in. ..............................7
Refrigerator cabinet to center of handles ...................8
N600 models - 32.5 in.
N800 models - 39.5 in.
Art01733
1
8
7
5
6
4
3
2
1. Make sure the enclosure is 59.88 - 60.01 inches
high for N82X, N82XXX, N84X, N84XXX, N84XIM,
and N84XIMXX models or 52.88 - 53.01 inches high
for N62X, N62XXX, N64X, N64XXX, N64XIM, and
N64XIMXX models x 23.50 - 23.63 inches wide x
24.00 inches deep.
2. Make sure the floor is solid and level.
- The floor must be metal or a wood panel and
extend the full width and depth of the enclosure.
- The floor must be able to support the weight of the refrigerator and its contents.
3. Make sure there are no adjacent heat sources such as a furnace vent, a hot water heater vent, etc.
4. If there is more than 1/2 inch between either side of the refrigerator and the inside of the enclosure:
- Fill the space with fiberglass insulation or add a baffle to eliminate the excess clearance.
- Make sure that the rear of the batt-type insulation is between 18 - 19 inches from the face of the enclosure.
- Securely attach the batt-type insulation to the enclosure so that it remains in this position during refrigerator installation, if it
becomes wet, and in windy conditions.
Assemble the Enclosure for the
Refrigerator