Sony MDS-JE320 - Manuel (Page 10)

Recording on MDs
Useful Tips for Recording
OISPLAY/CHAR
Lli^ll " 1
a 1 4*^ 1 CSD
pi » 1
6 Q
irni
EDIT/NO YES O ■
Checking the remaining recordable time on
the MD-
• when you press DISPLAY / CHAR while recording,
the remaining recordable time on the MD appears.
• When you press DISPLAY / CHAR repeatedly while
the deck is stopped, the display changes as follows:
total recorded time, remaining recordable time on
the MD, disc name (see page 14).
If "Auto Cut" appears in the display
(Auto Cut)
There has been no sound input for 30 seconds while
INPUT is set to DIGITAL and the source is cormected
through DIGITAL IN, The 30 seconds of silence are
replaced by a blatdc of about 3 seconds and the deck
changes to recording pause.
You can turn off the Auto Cut Function
For details, see "If "Smart Space" appears in the
display" below.
If "Smart Space" appears in the display
(Smart Space)
There has been an extended silence of 4 to 30 seconds
in length when INPUT is set to DIGITAL and the
source is connected through DIGITAL IN. The silence
is replaced with a bltink of about 3 seconds and the
deck continues recording.
To turn off the Smart Space Function and Auto Cut
Function
1 During recording pause, press EDIT / NO repeatedly
until "S. Space ?" appears in the display.
2 Press YES.
3 Press EDIT/NO to display "S. Space OFF."
To turn on the Smart Space Function and Auto Cut
Function again
1 During recording pause, press EDIT / NO repeatedly
until "S. Space ?" appears in the display.
2 Press YES twice to display "S. Space ON".
Notes
• When you turn off the Smart Space Function, the Auto Cut
Function is also turned off automatically.
• The Smart Space Function and Adto Cut Function are
factory set to on.
• If you turn off the deck or discormect the AC power cord,
the deck will recall the last setting (ON or OFF) of the
Smart Space and Auto Cut Functions the next time you
turn on the deck.
Playing back tracks just recorded
Do this procedure to immediately play back tracks that
have just been recorded.
Press C>- immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after
recording
1 Press ■ again after stopping recording.
2 Press 1>.
Playback starts from the first track of the MD.
IQfA/