Aerus Floor Pro Encore - Manuel (Page 12)

12
TWO STEP APPLICATION GUIDE
Note: Before using the chart below, you should carefully read and understand the following statements.
These statements provide directions that apply to most floor types.
• Always vacuum first. • Clean out spray mister before using.
• Apply solutions to a small area at a time, approximately 3’x3’. • Never use green pads on easily marred surfaces.
• Clean accessories with warm water when finished. • Test carpeting for color fastness and durability.
• Scrubbing and polishing requires scrub brushes. • Always unplug unit before changing brushes or pads.
Solutions* A - Aerus™ Wood Floor Wax B - Aerus™ No-Wax Floor Cleaner
C - Aerus™ Floor Cleaner and Stripper D - Aerus™ Tile and Terrazzo Floor Polish E - Aerus™ Turbo Shampoo
A thru D - to be applied with Aerus™ Mist Sprayer E - to be applied thru dispenser tank
Surface
Carpet
Wood
No wax
Vinyl
Rubber
Tile
Terrazzo
Asphalt
Tile
Ceramic
Linoleum
Type or
Function
Plush
Loop or shag
Wax Finish
Wax Touch-up
Poly/Acrylic Finish
Stripping
Cleaning
Polishing
Solution*
E
E
A
A
B
C
B
D
Step 1 Application
• Dispense foam and work into floor with
shampoo brushes
• Allow to dry
• Dispense foam and work into floor with
shampoo brushes
• Allow to dry
• Spray a moderate to heavy mist
• Spread and work in using scrub brushes
• Allow to dry
• Spray a fine mist
• Spray a fine mist
• Spray a heavy mist
• Spread and work in using scrub brushes
• Spray a fine mist
• Spray a moderate to heavy mist
• Spread and work in using scrub brushes
Step 2 Application
• Naplift then vacuum
• Vacuum
• Polish surface using scrub brushes
• Buff using lamb’s wool or disposable pads
• Buff using lamb’s wool or disposable pads
• Buff using lamb’s wool or disposable pads
• Mop up dirty solution, rinse and mop
• Buff using lamb’s wool or disposable pads
• Polish surface using scrub brushes
• Buff using lamb’s wool or disposable pads