Rockwell Automation 1769-PB4 Compact I/O Expansion Power Supplies - Manuel (Page 13)

Compact I/O Expansion Power Supplies 13
Publication 1769-IN028B-EN-P - October 2008
Mount a Power Supply on a DIN Rail
The power supply can be mounted using the following DIN rails:
• 35 x 7.5 mm (EN 50 022 - 35 x 7.5)
• 35 x 15 mm (EN 50 022 - 35 x 15)
1. Before mounting a power supply or module on a DIN rail, close the DIN rail latches.
2. Press the DIN rail mounting area of the module against the DIN rail.
The latches will momentarily open and lock into place. The following illustration
shows a power supply being attached to the I/O modules in a DIN rail mounted
Compact I/O system.
1769 Cable
44722