Rockwell Automation 1769-IQ6XOW4 Compact Combination 24V dc Sink/Source Input AC/DC Relay Output Module - Manuel (Page 16)

16 Compact™ Combination 24V dc Sink/Source Input & AC/DC Relay Output Module
Publication 1769-IN050A-EN-P - April 2001
Input/Output Specifications
Input Specifications
Specification 1769-IQ6XOW4
Bus Current Draw (max.) 105 mA at 5V dc (0.525W)
50 mA at 24V dc (1.200W)
Heat Dissipation 2.75 Total Watts (The Watts per point, plus the minimum Watts, with all
points energized.)
Power Supply Distance Rating 8 (The module may not be more than 8 modules away from the power
supply or controller.)
Isolated Groups Group 1: inputs 0 to 5
(Group operates in either sink or source configuration.)
Group 2: outputs 0 to 3
Input Group to Bus Isolation Verified by one of the following dielectric tests: 1200V ac for 1 sec. or
1697V dc for 1 sec.
75V dc working voltage (IEC Class 2 reinforced insulation)
Output Group to Bus Isolation Verified by one of the following dielectric tests: 1836V ac for 1 sec. or
2596V dc for 1 sec.
265V ac working voltage (IEC Class 2 reinforced insulation)
Input Group to Output Group Isolation Verified by one of the following dielectric tests: 1836V ac for 1 sec. or
2596V dc for 1 sec.
265V ac working voltage (basic insulation)
150V ac working voltage (IEC Class 2 reinforced insulation)
Vendor I.D. Code 1
Product Type Code 7
Product Code 66
Specification 1769-IQ6XOW4
Voltage Category 24V dc (sink/source
(1)
)
(1) Sinking/Sourcing Inputs - Sourcing/sinking describes the current flow between the I/O module and the field device.
Sourcing input circuits supply (source) current to sinking field devices. Sinking input circuits are driven by a current sourcing
field device.
Europe: DC sinking input and sourcing output module circuits are the commonly used options.
Operating Voltage Range 10 to 30V dc at 30°C (86°F)
10 to 26.4V dc at 60°C (140°F)
Number of Inputs 6
Signal Delay (max.) On Delay: 8.0 ms
Off Delay: 8.0 ms
Off-State Voltage (max.) 5V dc
Off-State Current (max.) 1.5 mA
On-State Voltage (min.) 10V dc
On-State Current (min.) 2.0 mA
Inrush Current (max.) 250 mA
Nominal Impedance 3K Ω
IEC Input Compatibility Type 3