Aquascape 1-Disc Fogger (99571) - Manuel (Page 2)

Congratulations on your purchase of the new Aquascape Floating
Pond Fogger with LED Lights and Remote Controller! This single disc
fogger is designed to float in your pond and create a misty effect over
the water. The unit is supplied with a remote control to change the
lighting effects, adjust the mist volume, and turn the fogger on/off.
The fogger is also equipped with an automatic shut-off to prevent
disc damage due to low water level.
Use of this Manual
• Please read this instruction manual thoroughly to make sure that you use it properly. This
manual contains important information on first time use, general operation, maintenance
and specific electrical operating specifications. It is recommended that you keep this
manual in a handy location for quick reference, maintenance and troubleshooting in
the future.
Features & Functions
• This fogger diffuses water into very small particles creating a “smoke-on-the-water” dry
ice effect without the dry ice chemicals and without the need for any special handling,
safety and health concerns. It generates negative ions. It also helps to increase the
humidity and freshen the air.
• Changing LED lights create a comfortable and relaxing atmosphere. The design and ther-
matically sealed circuit make sure that it can work normally in the water all the time.
• The water-level sensor switch automatically turns the fogger off whenever the water level
drops below the required depth. Once water is added, bringing the water level depth back
to the required level, the fogger will automatically operate and the LED lights will turn on.
• The temperature sensor switch automatically turns the fogger off whenever the tempera-
ture is higher than that of normal operation.

Floating Pond Fogger
with LeD Lights
Installation & Maintenance Instructions
1) Getting to Know Your Floating Pond Fogger
1.1 How it Works
• The fogger utilizes electrical ultrasound vibrations to produce the fog. The fog contains a
large number of negative ions, which freshens the air and increases the humidity of the
air. The fogger also utilizes multi-colored LED lighting.
• The fogger also has a water-level sensor switch that automatically turns off the unit when
the water level drops; avoiding damage to the ceramic disc. The indicator light on the top
of the fogger will turn on when there are low levels of water.
• The fogger includes a remote emitter and receiver, which can be used up to 15 meters
from the actual fogger. This can turn the fogger and LED on/off, control the 16-mode light-
ing effects and adjust the fog volume.
Working Voltage
(VAC)
Working electric
Current (A)
Ultrasonic
Freq. (MHz)
Ceramic Disc Size
(mm)
24 1.12 1.75 Ø 20
Fog Volume (ml/h)
Water Temp.
(ºC)
Ceramic Disc Plating
Lifespan of Disc
(hours)
≥ 300 0 ˜ 50 Nickel or Titanium 3000
) Operating Instructions
Be sure the transformer voltage is the same as your local power supply. If not, don’t
use this device until you have the correct voltage.
2.1 Place the Fogger
• Place the floating pond fogger in the water and submerge it until it is completely covered
by water. If the water is too shallow the fogger will not turn on.
• Place the fogger plug into the outlet of the receiver.
• Plug the transformer into the power supply. If it is correctly installed, it will work immediately.
99571 1-Disc Fogger Instructions2 2 6/2/06 2:41:30 PM