Installation, Typical installation – Aquascape UltraKlean Pressurized Filter (95053 & 95054) Manuel d'utilisation

Page 4

Advertising
background image

4

US 1-866-877-6637 |

CAN 1-866-766-3426 | www.aquascapeinc.com

for More

inforMation

inStallatiOn

• use only in fully assembled state, and make sure that all

clamps securing the filter top to the base are snapped
down into the closed position before turning on the pump.

• the uV lamp and quartz sleeve are fragile. please

inspect for any signs of damage prior to installing.

NOTe: Do not touch UV lamp with bare hands

as the oil from skin may damage the bulb

performance. Make sure there is no moisture

inside the quartz sleeve or on the bulb prior to operating.

• the filter is weatherproof, but is not designed

to be submerged into the pond. submerging
the pond filter could cause electric shock
and will void the product warranty

• if located in a cold freezing climate remove

pond filter during the winter, drain filter
and store in a frost free location.

with AquaForce

®

Pond Pump

with AquaJet

Pump

with Ultra

Pump

• Do not filter hazardous materials or liquids, such as oil,

saltwater or organic solvents.

• Do not block or restrict the filter discharge.
• products returned must be cleaned, sanitized, or

decontaminated, as necessary prior to shipment so as
to ensure that employees will not be exposed to health
hazards in handling said material. all applicable laws and
regulations shall apply.

IMPORTANT! Aquascape, Inc. is not responsible

for losses, injury, or death resulting from a

failure to observe these safety precautions,

misuse or abuse of filters, pumps or other equipment.

tyPiCal inStallatiOn

95084 UltraKlean Pond Filter Instructions FINAL 12-13.indd 4

12/12/13 4:29 PM

Advertising