Listening to your system 02, Using front surround, Using advanced surround – Pioneer DCS-340 Manuel d'utilisation

Page 12: Adjusting the effect level, Dolby pro logic ii music settings

Advertising
background image

Listening to your system

02

12

En

Dolby Pro Logic II Music settings

When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.

1

With Dolby Pro Logic II Music mode active,

press

SOUND

.

2

Use

/

to select ‘C Width’, ‘Dimen.’ or

‘Pnrm.’

C Width

(Center Width): Makes the center

channel wider (higher settings) or
narrower (lower settings)

Dimen.

(Dimension): Makes the sound

more distant (minus settings), or more
forward (positive settings)

Pnrm.

(Panorama): Creates more spacious

surround sound

3

Use

/

to adjust the setting then press

ENTER

to confirm.

Using Front Surround

The Front Surround modes are effective when
you are using the Front surround 3-spot
speaker setup as described in

Home theater

sound setup

on page 6. The surround speakers

should be placed on top of the front speakers
and oriented either towards the walls, or
straight ahead, depending on which mode you
are using (see below).

Press FRONT SURROUND to select a Front

Surround mode.

Press repeatedly to select

FrtMovie

,

FrtMusic

or

ExtPower

.

• If you have selected

FrtMovie

or

FrtMusic

,

turn each surround speaker so that the

arrow at the base is lined up with the

FRONT SURROUND

arrow on the front

speaker. With

ExtPower

(Extra Power),

line up the

arrow with the

EXTRA

POWER

arrow (the surround speakers

should be in the same direction as the front
speakers).

• See

Adjusting the effect level

below to

emphasize or reduce the Front Surround
effect.

Using Advanced Surround

The Advanced Surround effects can be used
with any multichannel or stereo source for a

variety of additional surround sound effects.

1

Press

ADVANCED

to select an Advanced

Surround mode.

Press repeatedly to select

AdvMovie

,

AdvMusic

,

Expanded

,

TV Surr.

,

Sports

,

Game

or

5 Stereo

.

Adjusting the effect level

You can emphasize or reduce the effect of the
Front Surround or Advanced Surround modes

as you like.

2

1

With one of the Front or Advanced

Surround modes active, press

SOUND

.

2

Use

/

to select ‘Effect’.

3

Use

/

to adjust the effect level then

press ENTER to confirm.

CD

FM/AM

OPEN CLOSE

DVD

TUNER

TV

LINE

L1/L2

0

8

FRONT

SURROUND

Note

1 The 5-spot setup described in Home theater sound setup on page 6 should be used with these effects.
2 You can set the effect level for all modes independently.

FrtMovie / FrtMusic

ExtPower

0

CLR

ENTER

MAIN

SUB

SUB

ADVANCED

SOUND

DIALOGUE

SURROUND

MIDNIGHT

QUIET/

XV-DV-NEW_WIZ.book 12 ページ 2004年12月22日 水曜日 午後2時41分

Advertising