Breville BES830XL - Manuel (Page 12)

22 23 22
STEP 8 - PREPARING FOR EXTRACTION
• Ensure all the button surrounds on the
control panel are illuminated, indicating
the machine has reached the correct
temperature for extraction, and is ready
for
use.
• Ensure the drip tray and portafi lter are
in place.
• Place one or two pre-warmed cups
beneath the portafi lter outlet.
PRESET SHOT SIZE - ONE SHOT
Press the one cup button once. A
preset extraction of approximately 1 oz
of espresso will be delivered. A pumping
noise will be heard in this operation. The
machine will automatically stop once the
preset pour has been delivered.
PRESET SHOT SIZE - DOUBLE SHOT
Press the two cup button once.
A preset extraction of approximately 2oz
of espresso will be delivered. A pumping
noise will be heard in this operation. The
machine will automatically stop once the
preset pour has been delivered.
NOTE:
The minimum pour for one cup and
two cups is set at ½ oz (15ml).
NOTE:
Pressing the one cup or two cup
buttons during a programmed
espresso will immediately stop the pour.
PERFECTING YOUR SKILLS - "NON-PRESSURIZED" SINGLE WALL FILTERS
PROGRAMMING SINGLE ESPRESSO
Programming over-rides the preset shot
sizes (1oz or 2oz), re-programming the
button to pour your preferred shot size.
1. Prepare to make a single cup of
espresso by following steps 1 to 7 in
‘PERFECTING YOUR SKILLS - Single
Wall Filters’, pages 20-22.
2. Place your cup underneath the group
head.
3. To begin programming, press the
‘PROGRAM’ button once. The machine
will beep once and the program button
will begin to fl ash. This indicates the
machine is in programming mode.
4. Press the one cup button once.
The machine will commence normal
pour function, and the one cup button
surround will begin to fl ash.
5. When the desired amount of espresso
has poured into the cup, press the
one cup button to stop the
pour. The machine will beep twice,
indicating it has saved your
preferred pour quantity and exited
programming
mode.
PROGRAMMING DOUBLE ESPRESSO
Programming over-rides the preset shot
sizes (1oz or 2oz), re-programming the
button to pour your preferred shot size.
1. Prepare to make a double cup of
espresso by following steps 1 to 7 in
‘PERFECTING YOUR SKILLS - Single
Wall Filters’, pages 20-22.
2. Place your cup underneath the
group
head.
3. To begin programming, press the
‘PROGRAM’ button once. The machine
will beep once and the program button
will begin to fl ash. This indicates the
machine is in programming mode.
4. Press the two cup button
once. The machine will commence
normal pour function, and the two cup
button surround will begin to fl ash.
5. When the desired amount of espresso
has poured into the cup, press the
two cup button to stop the pour.
The machine will beep twice, indicating
it has saved and exited programming
mode.
PROGRAMMING YOUR BREVILLE DIE-CAST PROGRAMMABLE ESPRESSO MACHINE
NOTE:
The amount of espresso extracted
in the cup will vary depending on the
coarseness of your grind and grind
amount.
NOTE:
When using a single shot fi lter, for
optimal fl avor, you should only extract
approximately 1 oz. When using a double
shot fi lter, for optimal fl avor, you should
only extract approximately 2 oz.
BES830XL_IB_Issue1,09.indd 22-23 BES830XL_IB_Issue1,09.indd 22-23 4/1/10 11:02:43 AM 4/1/10 11:02:43 AM