Troubleshooting – AEG F66600VI1P Manuel d'utilisation

Page 41

Advertising
background image

• If you regularly use short duration

programmes, these can leave

deposits of grease and limescale

inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per

month.

12. TROUBLESHOOTING

If the appliance does not start or it stops

during operation. Before you contact an

Authorised Service Centre, check if you

can solve the problem by yourself with

the help of the information in the table.

With some problems, the display

shows a message.

Problem

Possible solution

You cannot activate the appli-
ance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no a damage fuse in the

fuse box.

The programme does not start.

• Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for

the end of the countdown.

• The appliance has started the procedure to re-

charge the resin inside the water softener. The du-
ration of the procedure is approximately 5 minutes.

The appliance does not fill with
water.
The display shows the message:
Appliance is not filling water.

• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is

not too low. For this information, contact your local
water authority.

• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clog-

ged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not drain the
water.
The display shows the message:
Appliance is not draining water.

• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks or

bends.

The anti-flood device is on.
The display shows the message:
Appliance is flooding or has an
error in the water inlet.

• Close the water tap and contact an Authorised Serv-

ice Centre.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For other alarm messages or problems

not described in the table, contact an

Authorised Service Centre.

ENGLISH

41

Advertising