AEG F66600VI1P - Manuel (Page 31)

Settings Values Description
Contrast From level 0 to level 9. Change the contrast of the
display.
Water hardness From level 1 to level 10. Set the level of the water
softener according to the
water hardness in your area.
Factory setting: level 5.
Rinse aid level From level 0 to level 6.
Level 0 = no release of rinse
aid. Set the level of the rinse aid
dispenser according to the
necessary quantity of rinse
aid.
Factory setting: level 4.
Languages List of languages. Set the preferred language.
Default language: English.
Display on floor List of colours. Set the colour of the Time-
Beam
Reset settings Reset the appliance to facto-
ry settings.
6.2 How to change a setting
with 2 values (ON and OFF)
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to change the value
from ON to OFF or vice versa.
6. Press repeatedly the Option key until
the display shows the programme
list.
6.3 How to change a setting
with multiple values
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to enter the next
level.
6. Select the new value or the number
of hours for the delay start.
7. Press the OK key to confirm.
8. Press repeatedly the Option key until
the display shows the programme
list.
6.4 How to save the
MyFavourite programme
You can only save 1 programme at a
time. A new setting cancels the previous
one.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select Set MyFavourite.
5. Press the OK key.
ENGLISH 31