Sony MDS-JA20ES - Manuel (Page 29)

Playing MDs
29 EN
§
18 W
23
C
PROGRAM
OPEN/CLOSE
TIME D.O BIT
NUM
!
A ˜ B
17 V
22 –
B
SHUFFLE PRESENT RECORDED PLAY MODE
SCROLL
CHAR
?
REPEAT
WRITE CLEAR
16 U
21 Z
A
CONTINUE
DISPLAY
NAME
/ > 25
MENU/NO
19 X
24 .
D
(
P.HOLD
A.SPACE
STANDBY START STOP
T.REC MUSIC SYNC
REC-IT
20 Y
25 ,
E
)
M.SCAN
YES
0
=
·
)
+ r
P p
DATE
CD-SYNC
3 H
8 M
13 R
2 G
7 L
12 Q
1 F
6 K
11 P
4 I
9 N
14 S
5 J
10 O
15 T
FILTER
CLEAR
MENU/NO
YES
PROGRAM
>25
DISPLAY
·
0/)
g
0 )
§ ( P p r
≠ AMS ± 0/)
YES MENU/NO DISPLAY/CHAR
( PLAY MODE
b) When using the remote
Press the number buttons to enter the tracks
you want to program in the order you want.
To program a track with a number over 25, use
the >25 button (see page 26).
If you enter the wrong track number
Press 0 or ) until the wrong track number
flashes, then enter the correct track number
with the number buttons.
If “0” flashes, press 0.
4
Repeat Step 3 to enter other tracks.
The entered track is added to the location where
the “0” flashes.
Each time you enter a track, the total program time
is added up and appears in the display.
5
After finishing programming, press YES.
“Complete!!” appears and programming is
completed.
6
Press PLAY MODE repeatedly (or PROGRAM
once) until “PROGRAM” appears in the display.
7
Press ( to start Program Play.
To cancel Program Play
Press PLAY MODE repeatedly (or CONTINUE once)
when the deck is stopped until “PROGRAM”
disappears.
z
The program remains even after Program Play ends
When you press (, you can play the same program
again.
Notes
• The display shows “- -m - -s” instead of the total playing
time when the total playing time of the program exceeds
199 minutes.
• “ProgramFull” appears when you program over 25 tracks.
Erase the unnecessary tracks to enter other tracks.
(Continued)
Creating Your Own Program
(Program Play)
You can specify the playback order of the tracks on an
MD and create your own programs containing up to
25 tracks.
1
While the deck is stopped, press MENU/NO
twice to display “Setup Menu”.
2
Turn AMS to display “Program ?”, then press
AMS or YES.
3
Do either a) or b) :
a) When using the controls on the deck
1 Turn AMS until the track number you want
appears in the display.
2 Press AMS.
If you enter the wrong track number
Press 0 or ) until the wrong track number
flashes, turn AMS to set the correct track
number, then press AMS.
If “0” flashes, press 0.
Number
buttons