Sony PRS-700 - Manuel (Page 120)

PRS-700.GB.4-124-649-11(1)
Connection to the computer
Symptom Cause or corrective action
The Reader cannot
be operated during
USB connection.
 Disconnect the Reader from the USB
connection.
The Reader cannot
be recognized.
 Is the power of the Reader turned on? Is
the USB cable connected properly?
Verify the above and try again.
 Are you using a USB hub or USB
extension cable?
Connecting the Reader via a USB
hub or extension cable may not work
and is not supported. Connect the
USB cable directly to the computer.
 Verify that (indicating connection
via USB) is displayed at the top of the
Reader’s screen. If the Reader still
cannot be recognized, disconnect the
USB cable from the Reader, then
reconnect it after a while.
 If “Device Lock” of the Reader is set
to “On,” set it to “Off.” If the Reader is
locked, it will not be recognized on
your computer.
Content cannot be
transferred to the
Reader from your
computer.
 The USB cable is not connected
properly. Disconnect the USB cable,
then reconnect it.
 There is not enough free space on
the Readers memory. Transfer any
unnecessary content back to eBook
Library or to a “Memory Stick Duo”
Memory Card, then delete it to
increase free space on the Reader.
Continued 120
US