Sony CDX-GT710HD - Manuel (Page 11)

11
The TAG indicator starts blinking and the
unit starts retrieving song information.
After retrieving the song information, the
unit starts saving the data, and “STORE”
appears in the display for 2 seconds. The
TAG indicator blinks while saving the song
information.
The TAG indicator goes off after the unit
completes saving the song information.
The TAG indicator lights up again at the
beginning of the next song.
Notes
• If the song information is not included in the
HD Radio station broadcast, the TAG indicator
does not light up.
• It takes about 10 seconds maximum to retrieve
song information.
• If
 is pressed right after the beginning of
a song, the unit may retrieve the information of
the previously broadcast song as well as the
current song.
• If
 is pressed just before the end of a
song, the unit may retrieve the information of
the next song, in addition to the current song.
• The maximum number of tagged songs that
you can save to this unit is 50. If you press
 when 50 tagged songs are already saved,
“TAG MEM FULL” will appear in the display
and song information will not be retrieved.
Transferring retrieved song
information
You can transfer song information retrieved
and saved to an iPod using this unit.
1
Open the USB cover, then connect the iPod
to the USB port with the USB connection
cable (not supplied).
The unit automatically starts transferring
saved song information, and “TRANSFER”
appears in the display and starts blinking
during the transfer.
If an iPod is connected to the unit during
tagged song retrieval, the unit immediately
starts transferring the data to the iPod, after
the data is saved.
Once the unit completes transferring tagged
song information to the iPod, the saved data
will be erased from the unit.
Notes
• Do not remove the iPod or detach the front
panel while “TRANSFER” is blinking in the
display. The unit cannot transfer song
information if the iPod is removed.
• If the connected iPod does not support for
iTunes Tagging, song information will not be
transferred, even after this unit saves the data,
and the message “TAG NO SUPRT” will appear
in the display.
• If the connected iPod does not have enough free
space in the memory, song information will not
be transferred even after this unit saves the data,
and the message “IPOD FULL” appears in the
display.
Deleting tagged song information
You can delete all tagged song information
before transferring to iPod.
1
Press
, rotate the control dial until
“GENERAL” appears, then press it.
2 Rotate the control dial until “TAG DEL”
appears, then press it.
3
Rotate the control dial to select “YES,” then
press it.
4 Press (BACK) to return to the previous
display.
Note
Song information once deleted cannot be
restored.