Switching the zone setting of the remote, On the main remote commander 1, On the zone 2/zone 3 remote commander 1 – Sony VPL-5400ES Manuel d'utilisation

Page 95

Advertising
background image

95

GB

Usi

ng M

u

lti

-zon

e

Fe

ature

s

Switching the zone
setting of the remote

The remote commanders are initially set to be
used in zone 2. If you want to use them in zone
3, switch the zone setting of the remote.

Main remote

Zone 2/Zone 3 remote

On the main remote commander

1

Press ?/1 while pressing RM SET UP.
The AMP and ZONE buttons flash.

2

Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT button
lights up.

3

Press the numeric button 2 for the
zone 2, or 3 for the zone 3 while the
ZONE button is flashing.
The ZONE button lights up.

4

Press ENT/MEM.
The ZONE button flashes twice and the
remote switches to zone 2 or zone 3 mode.

On the zone 2/zone 3 remote
commander

1

Press ?/1 while pressing RM SET UP.
The RM SET UP button flashes and the
SHIFT button lights up.

2

Press the numeric button 2 for the zone
2, or 3 for the zone 3 while the RM SET
UP button is flashing.
The RM SET UP button lights up.

3

Press ENTER.
The RM SET UP button flashes twice and
the remote switches to zone 2 or zone 3
mode.

ZONE

AMP

2, 3

ENT/
MEM

SHIFT

RM SET

UP

?/1

2, 3

?/1

ENTER

SHIFT

RM SET

UP

Advertising
Ce manuel est liée aux produits suivants: