Operating the receiver from another zone, Zone 2/zone 3 operations), Operating the receiver from zone 2 – Sony VPL-5400ES Manuel d'utilisation

Page 96

Advertising
background image

96

GB

Operating the receiver
from another zone

(ZONE 2/ZONE 3 operations)

The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.

1

Turn on the main receiver (this
receiver).

2

In the case of illustration 1-2
(page 90), t
urn on the amplifier
in zone 2.

3

Press ZONE.

The remote switches to zone 2.

4

Press ?/1.

The zone function is activated.

5

Press MENU.

The menu is displayed on the TV screen.

6

Press

V/v to select “

Input,”

then press

or

b.

7

Press

V/v to select the input

source you want, then press

.

For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.

8

Adjust to a suitable volume.

• In the case of illustration 1-1

(page 90), adjust the volume using
MASTER VOL +/– on the remote.

• In the case of illustration 1-2

(page 90), adjust the volume using the
receiver in zone 2.

To finish the zone 2 operation

Press ?/1 after pressing ZONE.

ZONE

V/v/b,

MENU

?/1

MASTER

VOL

Input
buttons

Operating the receiver from
zone 2

Advertising
Ce manuel est liée aux produits suivants: